1/2 in Drive Electric Impact Wrench Brushless 3-Speed Drive with Socket

Description

Brushless Motor ( no brush inside the motor).
No sparks, no heat, no smoke is generated during operation. Easy to maintain and longer service life. Has 5 times longer working life than brushed motor.
3 modes/speeds to tighten bolts/nuts and 2 modes to loosen bolts/nuts. Different speeds and modes for different applications.
1 (Low mode)
0-1000/min
Tighten with a small force to avoid thread damage, such as the installation of furniture
2 (Medium mode)
0-1800/min
Fastening occasions where the power is well controlled, such as the loading and unloading of car tires
3 (High mode
）
0-2450/min
Fasten with maximum force and speed. Need to reach a certain strength and speed, such as scaffold installation in engineering
Self-stop function. Prevent the run-off of the nuts and save the power.
Powerful torque. Max. torque is 350N.m
LED Worklight with 10 seconds delayed improves visibility of the working areas.
Durable, ergonomic design, comfortable handle, low vibration
Intended use: loosening/tightening bolts and nuts. Suitable for bolts M12-M24
Specifications
Product Wt: 3.3lb ( including the battery)
Motor : Brushlessall-copper motor
Rated voltage: DC 20V
Anvil size: 13mm(1/2”)
No load speed: 0-1000/1800/2450/min
Impacts per minute: 0-3200/min (IPM)
Max torque：350N.m
Li-ion Battery：DC 20V, 1.5Ah
No-load runtime
1.5AH, 45 minutes At speed 3（2450/min）
Charger input
AC 100-240V, 50/60Hz,1.0A
Charger output
DC 21.5V, 1.5A
Charging time
1-2H
Package Content
1 x Electric Impact Wrench
1 x battery
1 x adaptor
1 x manual
1 x belt clip+ screw
1 x 19mm impact socket+1x O-ring+1x retaining pin
1 x socket adaptor (1/2" Square Drive to 1/4" Hex Female Socket Adapter}